Manipulating, analyzing and exporting data with tidyverse

Last updated on 2024-03-12 | Edit this page

Manipulating and analyzing data with dplyr and tidyr



Data manipulation using dplyr and tidyr

Bracket subsetting is handy, but it can be cumbersome and difficult to read, especially for complicated operations. Enter dplyr. dplyr is a package for helping with tabular data manipulation. It pairs nicely with tidyr which enables you to swiftly convert between different data formats for plotting and analysis.

The tidyverse package is an “umbrella-package” that installs tidyr, dplyr, and several other useful packages for data analysis, such as ggplot2, tibble, etc.

The tidyverse package tries to address 3 common issues that arise when doing data analysis in R:

  1. The results from a base R function sometimes depend on the type of data.
  2. R expressions are used in a non standard way, which can be confusing for new learners.
  3. The existence of hidden arguments having default operations that new learners are not aware of.

You should already have installed and loaded the tidyverse package. If you haven’t already done so, you can type install.packages("tidyverse") straight into the console. Then, type library(tidyverse) to load the package.

What are dplyr and tidyr?

The package dplyr provides helper tools for the most common data manipulation tasks. It is built to work directly with data frames, with many common tasks optimized by being written in a compiled language (C++). An additional feature is the ability to work directly with data stored in an external database. The benefits of doing this are that the data can be managed natively in a relational database, queries can be conducted on that database, and only the results of the query are returned.

This addresses a common problem with R in that all operations are conducted in-memory and thus the amount of data you can work with is limited by available memory. The database connections essentially remove that limitation in that you can connect to a database of many hundreds of GB, conduct queries on it directly, and pull back into R only what you need for analysis.

The package tidyr addresses the common problem of wanting to reshape your data for plotting and usage by different R functions. For example, sometimes we want data sets where we have one row per measurement. Other times we want a data frame where each measurement type has its own column, and rows are instead more aggregated groups (e.g., a time period, an experimental unit like a plot or a batch number). Moving back and forth between these formats is non-trivial, and tidyr gives you tools for this and more sophisticated data manipulation.

To learn more about dplyr and tidyr after the workshop, you may want to check out this handy data transformation with dplyr cheatsheet and this one about tidyr.

As before, we’ll read in our data using the read_csv() function from the tidyverse package readr.

R

surveys <- read_csv("data_raw/portal_data_joined.csv")

OUTPUT

#> Rows: 34786 Columns: 13
#> ── Column specification ────────────────────────────────────────────────────────
#> Delimiter: ","
#> chr (6): species_id, sex, genus, species, taxa, plot_type
#> dbl (7): record_id, month, day, year, plot_id, hindfoot_length, weight
#> 
#> ℹ Use `spec()` to retrieve the full column specification for this data.
#> ℹ Specify the column types or set `show_col_types = FALSE` to quiet this message.

R

## inspect the data
str(surveys)

R

## preview the data
view(surveys)

Next, we’re going to learn some of the most common dplyr functions:

  • select(): subset columns
  • filter(): subset rows on conditions
  • mutate(): create new columns by using information from other columns
  • group_by() and summarize(): create summary statistics on grouped data
  • arrange(): sort results
  • count(): count discrete values

Selecting columns and filtering rows

To select columns of a data frame, use select(). The first argument to this function is the data frame (surveys), and the subsequent arguments are the columns to keep.

R

select(surveys, plot_id, species_id, weight)

To select all columns except certain ones, put a “-” in front of the variable to exclude it.

R

select(surveys, -record_id, -species_id)

This will select all the variables in surveys except record_id and species_id.

To choose rows based on a specific criterion, use filter():

R

filter(surveys, year == 1995)

Pipes

What if you want to select and filter at the same time? There are three ways to do this: use intermediate steps, nested functions, or pipes.

With intermediate steps, you create a temporary data frame and use that as input to the next function, like this:

R

surveys2 <- filter(surveys, weight < 5)
surveys_sml <- select(surveys2, species_id, sex, weight)

This is readable, but can clutter up your workspace with lots of objects that you have to name individually. With multiple steps, that can be hard to keep track of.

You can also nest functions (i.e. one function inside of another), like this:

R

surveys_sml <- select(filter(surveys, weight < 5), species_id, sex, weight)

This is handy, but can be difficult to read if too many functions are nested, as R evaluates the expression from the inside out (in this case, filtering, then selecting).

The last option, pipes, are a recent addition to R. Pipes let you take the output of one function and send it directly to the next, which is useful when you need to do many things to the same dataset. Pipes in R look like %>% and are made available via the magrittr package, installed automatically with dplyr. If you use RStudio, you can type the pipe with Ctrl

  • Shift + M if you have a PC or Cmd + Shift + M if you have a Mac.

R

surveys %>%
  filter(weight < 5) %>%
  select(species_id, sex, weight)

In the above code, we use the pipe to send the surveys dataset first through filter() to keep rows where weight is less than 5, then through select() to keep only the species_id, sex, and weight columns. Since %>% takes the object on its left and passes it as the first argument to the function on its right, we don’t need to explicitly include the data frame as an argument to the filter() and select() functions any more.

Some may find it helpful to read the pipe like the word “then.” For instance, in the example above, we took the data frame surveys, then we filtered for rows with weight < 5, then we selected columns species_id, sex, and weight. The dplyr functions by themselves are somewhat simple, but by combining them into linear workflows with the pipe we can accomplish more complex manipulations of data frames.

If we want to create a new object with this smaller version of the data, we can assign it a new name:

R

surveys_sml <- surveys %>%
  filter(weight < 5) %>%
  select(species_id, sex, weight)

surveys_sml

Note that the final data frame is the leftmost part of this expression.

Challenge

Using pipes, subset the surveys data to include animals collected before 1995 and retain only the columns year, sex, and weight.

R

surveys %>%
    filter(year < 1995) %>%
    select(year, sex, weight)

Mutate

Frequently you’ll want to create new columns based on the values in existing columns, for example to do unit conversions, or to find the ratio of values in two columns. For this we’ll use mutate().

To create a new column of weight in kg:

R

surveys %>%
  mutate(weight_kg = weight / 1000)

You can also create a second new column based on the first new column within the same call of mutate():

R

surveys %>%
  mutate(weight_kg = weight / 1000,
         weight_lb = weight_kg * 2.2)

If this runs off your screen and you just want to see the first few rows, you can use a pipe to view the head() of the data. (Pipes work with non-dplyr functions, too, as long as the dplyr or magrittr package is loaded).

R

surveys %>%
  mutate(weight_kg = weight / 1000) %>%
  head()

The first few rows of the output are full of NAs, so if we wanted to remove those we could insert a filter() in the chain:

R

surveys %>%
  filter(!is.na(weight)) %>%
  mutate(weight_kg = weight / 1000) %>%
  head()

is.na() is a function that determines whether something is an NA. The ! symbol negates the result, so we’re asking for every row where weight is not an NA.

Challenge

Create a new data frame from the surveys data that meets the following criteria: contains only the species_id column and a new column called hindfoot_cm containing the hindfoot_length values (currently in mm) converted to centimeters. In this hindfoot_cm column, there are no NAs and all values are less than 3.

Hint: think about how the commands should be ordered to produce this data frame!

R

surveys_hindfoot_cm <- surveys %>%
    filter(!is.na(hindfoot_length)) %>%
    mutate(hindfoot_cm = hindfoot_length / 10) %>%
    filter(hindfoot_cm < 3) %>%
    select(species_id, hindfoot_cm)

Split-apply-combine data analysis and the summarize() function

Many data analysis tasks can be approached using the split-apply-combine paradigm: split the data into groups, apply some analysis to each group, and then combine the results. Key functions of dplyr for this workflow are group_by() and summarize().

The group_by() and summarize() functions

group_by() is often used together with summarize(), which collapses each group into a single-row summary of that group. group_by() takes as arguments the column names that contain the categorical variables for which you want to calculate the summary statistics. So to compute the mean weight by sex:

R

surveys %>%
  group_by(sex) %>%
  summarize(mean_weight = mean(weight, na.rm = TRUE))

You may also have noticed that the output from these calls doesn’t run off the screen anymore. It’s one of the advantages of tbl_df over data frame.

You can also group by multiple columns:

R

surveys %>%
  group_by(sex, species_id) %>%
  summarize(mean_weight = mean(weight, na.rm = TRUE)) %>%
  tail()

OUTPUT

#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.

Here, we used tail() to look at the last six rows of our summary. Before, we had used head() to look at the first six rows. We can see that the sex column contains NA values because some animals had escaped before their sex and body weights could be determined. The resulting mean_weight column does not contain NA but NaN (which refers to “Not a Number”) because mean() was called on a vector of NA values while at the same time setting na.rm = TRUE. To avoid this, we can remove the missing values for weight before we attempt to calculate the summary statistics on weight. Because the missing values are removed first, we can omit na.rm = TRUE when computing the mean:

R

surveys %>%
  filter(!is.na(weight)) %>%
  group_by(sex, species_id) %>%
  summarize(mean_weight = mean(weight))

OUTPUT

#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.

Here, again, the output from these calls doesn’t run off the screen anymore. If you want to display more data, you can use the print() function at the end of your chain with the argument n specifying the number of rows to display:

R

surveys %>%
  filter(!is.na(weight)) %>%
  group_by(sex, species_id) %>%
  summarize(mean_weight = mean(weight)) %>%
  print(n = 15)

OUTPUT

#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.

Once the data are grouped, you can also summarize multiple variables at the same time (and not necessarily on the same variable). For instance, we could add a column indicating the minimum weight for each species for each sex:

R

surveys %>%
  filter(!is.na(weight)) %>%
  group_by(sex, species_id) %>%
  summarize(mean_weight = mean(weight),
            min_weight = min(weight))

OUTPUT

#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.

It is sometimes useful to rearrange the result of a query to inspect the values. For instance, we can sort on min_weight to put the lighter species first:

R

surveys %>%
  filter(!is.na(weight)) %>%
  group_by(sex, species_id) %>%
  summarize(mean_weight = mean(weight),
            min_weight = min(weight)) %>%
  arrange(min_weight)

OUTPUT

#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.

To sort in descending order, we need to add the desc() function. If we want to sort the results by decreasing order of mean weight:

R

surveys %>%
  filter(!is.na(weight)) %>%
  group_by(sex, species_id) %>%
  summarize(mean_weight = mean(weight),
            min_weight = min(weight)) %>%
  arrange(desc(mean_weight))

OUTPUT

#> `summarise()` has grouped output by 'sex'. You can override using the `.groups`
#> argument.

Counting

When working with data, we often want to know the number of observations found for each factor or combination of factors. For this task, dplyr provides count(). For example, if we wanted to count the number of rows of data for each sex, we would do:

R

surveys %>%
    count(sex)

The count() function is shorthand for something we’ve already seen: grouping by a variable, and summarizing it by counting the number of observations in that group. In other words, surveys %>% count() is equivalent to:

R

surveys %>%
    group_by(sex) %>%
    summarize(count = n())

For convenience, count() provides the sort argument:

R

surveys %>%
    count(sex, sort = TRUE)

Previous example shows the use of count() to count the number of rows/observations for one factor (i.e., sex). If we wanted to count combination of factors, such as sex and species, we would specify the first and the second factor as the arguments of count():

R

surveys %>%
  count(sex, species)

With the above code, we can proceed with arrange() to sort the table according to a number of criteria so that we have a better comparison. For instance, we might want to arrange the table above in (i) an alphabetical order of the levels of the species and (ii) in descending order of the count:

R

surveys %>%
  count(sex, species) %>%
  arrange(species, desc(n))

From the table above, we may learn that, for instance, there are 75 observations of the albigula species that are not specified for its sex (i.e. NA).

Challenge

  1. How many animals were caught in each plot_type surveyed?

R

surveys %>%
    count(plot_type)

Challenge(continued)

  1. Use group_by() and summarize() to find the mean, min, and max hindfoot length for each species (using species_id). Also add the number of observations (hint: see ?n).

R

surveys %>%
    filter(!is.na(hindfoot_length)) %>%
    group_by(species_id) %>%
    summarize(
        mean_hindfoot_length = mean(hindfoot_length),
        min_hindfoot_length = min(hindfoot_length),
        max_hindfoot_length = max(hindfoot_length),
        n = n()
    )

Challenge(continued)

  1. What was the heaviest animal measured in each year? Return the columns year, genus, species_id, and weight.

R

surveys %>%
    filter(!is.na(weight)) %>%
    group_by(year) %>%
    filter(weight == max(weight)) %>%
    select(year, genus, species, weight) %>%
    arrange(year)

Reshaping with pivot_longer and pivot_wider

In the spreadsheet lesson, we discussed how to structure our data leading to the four rules defining a tidy dataset:

  1. Each variable has its own column
  2. Each observation has its own row
  3. Each value must have its own cell
  4. Each type of observational unit forms a table

Here we examine the fourth rule: Each type of observational unit forms a table.

In surveys, the rows of surveys contain the values of variables associated with each record (the unit), values such as the weight or sex of each animal associated with each record. What if instead of comparing records, we wanted to compare the different mean weight of each genus between plots? (Ignoring plot_type for simplicity).

We’d need to create a new table where each row (the unit) is comprised of values of variables associated with each plot. In practical terms this means the values in genus would become the names of column variables and the cells would contain the values of the mean weight observed on each plot.

Having created a new table, it is therefore straightforward to explore the relationship between the weight of different genera within, and between, the plots. The key point here is that we are still following a tidy data structure, but we have reshaped the data according to the observations of interest: average genus weight per plot instead of recordings per date.

The opposite transformation would be to transform column names into values of a variable.

We can do both these of transformations with two tidyr functions, pivot_wider() and pivot_longer().

These may sound like dramatically different data layouts, but there are some tools that make transitions between these layouts more straightforward than you might think! The gif below shows how these two formats relate to each other, and gives you an idea of how we can use R to shift from one format to the other.

Pivoting from long to wide format

pivot_wider() takes three principal arguments:

  1. the data
  2. the names_from column variable whose values will become new column names.
  3. the values_from column variable whose values will fill the new column variables.

Further arguments include values_fill which, if set, fills in missing values with the value provided.

Let’s use pivot_wider() to transform surveys to find the mean weight of each genus in each plot over the entire survey period. We use filter(), group_by() and summarize() to filter our observations and variables of interest, and create a new variable for the mean_weight.

R

surveys_gw <- surveys %>%
  filter(!is.na(weight)) %>%
  group_by(plot_id, genus) %>%
  summarize(mean_weight = mean(weight))

OUTPUT

#> `summarise()` has grouped output by 'plot_id'. You can override using the
#> `.groups` argument.

R

str(surveys_gw)

This yields surveys_gw where the observations for each plot are distributed across multiple rows, 196 observations of 3 variables. Using pivot_wider() with the names from genus and with values from mean_weight this becomes 24 observations of 11 variables, one row for each plot.

R

surveys_wide <- surveys_gw %>%
  pivot_wider(names_from = genus, values_from = mean_weight)

str(surveys_wide)

We could now plot comparisons between the weight of genera (one is called a genus, multiple are called genera) in different plots, although we may wish to fill in the missing values first.

R

surveys_gw %>%
  pivot_wider(names_from = genus, values_from = mean_weight, values_fill = 0) %>%
  head()

Pivoting from wide to long format

The opposing situation could occur if we had been provided with data in the form of surveys_wide, where the genus names are column names, but we wish to treat them as values of a genus variable instead.

In this situation we are reshaping the column names and turning them into a pair of new variables. One variable represents the column names as values, and the other variable contains the values previously associated with the column names.

pivot_longer() takes four principal arguments:

  1. the data
  2. the names_to column variable we wish to create from column names.
  3. the values_to column variable we wish to create and fill with values.
  4. cols are the name of the columns we use to make this pivot (or to drop).

To recreate surveys_gw from surveys_wide we would create a names variable called genus and value variable called mean_weight.

In pivoting longer, we also need to specify what columns to reshape. If the columns are directly adjacent as they are here, we don’t even need to list the all out: we can just use the : operator!

R

surveys_long <- surveys_wide %>%
  pivot_longer(names_to = "genus", values_to = "mean_weight", cols = -plot_id)

str(surveys_long)

Note that now the NA genera are included in the long format data frame. Pivoting wider and then longer can be a useful way to balance out a dataset so that every replicate has the same composition

We could also have used a specification for what columns to exclude. In this example, we will use all columns except plot_id for the names variable. By using the minus sign in the cols argument, we omit plot_id from being reshaped

R

surveys_wide %>%
  pivot_longer(names_to = "genus", values_to = "mean_weight", cols = -plot_id) %>%
  head()

Challenge

  1. Reshape the surveys data frame with year as columns, plot_id as rows, and the number of genera per plot as the values. You will need to summarize before reshaping, and use the function n_distinct() to get the number of unique genera within a particular chunk of data. It’s a powerful function! See ?n_distinct for more.

R

surveys_wide_genera <- surveys %>%
  group_by(plot_id, year) %>%
  summarize(n_genera = n_distinct(genus)) %>%
  pivot_wider(names_from = year, values_from = n_genera)

OUTPUT

#> `summarise()` has grouped output by 'plot_id'. You can override using the
#> `.groups` argument.

R

head(surveys_wide_genera)

Challenge(continued)

  1. Now take that data frame and pivot_longer() it, so each row is a unique plot_id by year combination.

R

surveys_wide_genera %>%
  pivot_longer(names_to = "year", values_to = "n_genera", cols = -plot_id)

Challenge(continued)

  1. The surveys data set has two measurement columns: hindfoot_length and weight. This makes it difficult to do things like look at the relationship between mean values of each measurement per year in different plot types. Let’s walk through a common solution for this type of problem. First, use pivot_longer() to create a dataset where we have a names column called measurement and a value column that takes on the value of either hindfoot_length or weight. Hint: You’ll need to specify which columns will be part of the reshape.

R

surveys_long <- surveys %>%
  pivot_longer(names_to = "measurement", values_to = "value", cols = c(hindfoot_length, weight))
  1. With this new data set, calculate the average of each measurement in each year for each different plot_type. Then pivot_wider() them into a data set with a column for hindfoot_length and weight. Hint: You only need to specify the names and values columns for pivot_wider().

R

surveys_long %>%
  group_by(year, measurement, plot_type) %>%
  summarize(mean_value = mean(value, na.rm=TRUE)) %>%
  pivot_wider(names_from = measurement, values_from = mean_value)

OUTPUT

#> `summarise()` has grouped output by 'year', 'measurement'. You can override
#> using the `.groups` argument.

Exporting data

Now that you have learned how to use dplyr to extract information from or summarize your raw data, you may want to export these new data sets to share them with your collaborators or for archival.

Similar to the read_csv() function used for reading CSV files into R, there is a write_csv() function that generates CSV files from data frames.

Before using write_csv(), we are going to create a new folder, data, in our working directory that will store this generated dataset. We don’t want to write generated datasets in the same directory as our raw data. It’s good practice to keep them separate. The data_raw folder should only contain the raw, unaltered data, and should be left alone to make sure we don’t delete or modify it. In contrast, our script will generate the contents of the data directory, so even if the files it contains are deleted, we can always re-generate them.

In preparation for our next lesson on plotting, we are going to prepare a cleaned up version of the data set that doesn’t include any missing data.

Let’s start by removing observations of animals for which weight and hindfoot_length are missing, or the sex has not been determined:

R

surveys_complete <- surveys %>%
  filter(!is.na(weight),           # remove missing weight
         !is.na(hindfoot_length),  # remove missing hindfoot_length
         !is.na(sex))                # remove missing sex

Because we are interested in plotting how species abundances have changed through time, we are also going to remove observations for rare species (i.e., that have been observed less than 50 times). We will do this in two steps: first we are going to create a data set that counts how often each species has been observed, and filter out the rare species; then, we will extract only the observations for these more common species:

R

## Extract the most common species_id
species_counts <- surveys_complete %>%
    count(species_id) %>%
    filter(n >= 50)

## Only keep the most common species
surveys_complete <- surveys_complete %>%
  filter(species_id %in% species_counts$species_id)

To make sure that everyone has the same data set, check that surveys_complete has 30463 rows and 13 columns by typing dim(surveys_complete).

Now that our data set is ready, we can save it as a CSV file in our data folder.

R

write_csv(surveys_complete, file = "data/surveys_complete.csv")